Dr Sergey Belyakov – Optimising Sn-Cu-Ni solders for reflow and micro-joints
Investigator: Dr Sergey Belyakov
Supervisor: Dr Chris Gourlay
Duration: 30/06/2016 - 01/07/2013 (PDRA)
Collaborators: Nihon Superior Co., Ltd.
Description:Sn-0.7Cu-0.05Ni has been used as a Pb-free solder since 1999 and has become a popular choice for wave-soldering. This project seeks to understand microstructure formation during reflow soldering and microstructure evolution in service when any Sn-Cu-Ni alloy is soldered to Cu or Ni substrates. The research aims to control and predict solder joint reliability in this system and to understand the how joint miniaturisation affects microstructure formation and stability. This project involves controlled solidification experiments, reflow soldering and analytical electron microscopy.
- S.A. Belyakov, C.M. Gourlay, NiSn4 formation during solidification of Sn-Ni alloys. Intermetallics. 25 pp. 48-59, 2012
- S.A. Belyakov, C.M. Gourlay, NiSn4 formation in Ni-Sn and ENIG-Sn couples. Journal of Electronic Materials. 41(12) pp. 3331- 3341, 2012
- S.A. Belyakov, C.M. Gourlay, Role of Fe impurities in the nucleation of metastable NiSn4, Intermetallics. 37, pp. 32-41, 2013
Armin Daszki - Nucleation kinetics of Lead-free solder joints
TITLE: Armin Daszki - Nucleation kinetics of Lead-free solder joints
Project title: Nucleation kinetics of Lead-free solder joints
Investigator: Armin Daszki
Supervisors: Dr. Christopher Gourlay
Duration: 01/10/2016 – 30/09/2020
Lead-free solders, which have been developed to substitute lead based alloys, suffer greatly from anisotropy compared to the original tin-lead alloys due to the tetragonal crystal structure of the majority component, βSn. Additionally βSn suffers from nucleating difficulties usually leading to a single nucleation event which results in a single βSn grain, cyclic-twinned βSn grains, and/or interlaced-twinned βSn grain morphology. This nucleation-difficulty phenomena is seen clearly when repeatedly melting and solidifying Sn-based alloys and measuring the nucleation undercooling. The stochastic value of the nucleation undercooling can vary (depending on sample purity and size) from 45K to 80K, this is in stark comparison to the melting which is seen to always happen at a fixed repeatable value. Nucleation kinetics will be studied in lead-free solders, with and without soldering substrates, in order to understand fundamental nucleation laws with experimental data, as well as the implication of nucleation onset on the resulting microstructure. By understanding the nucleation phenomena of βSn in lead free solders we seek to control the microstructure sufficiently to alter the mechanical, and electrical properties of solder joints to improve reliability of electrical devices. Finally, the gained knowledge of nucleation in the studied system will be generalised and extended to any system.
Cheng-Jung Lin - New approaches to the grain refinement of Mg-Al based alloys
New approaches to the grain refinement of Mg-Al based alloys
Investigator: Cheng-Jung Lin
Supervisor: Dr. Christopher Gourlay
Co-supervisor: Dr. Qianqian Li
Duration: 05/11/2018 - 04/11/2022
Abstract: Grain refinement is vital for enhancing magnesium alloys in terms of castability, formability, strength and ductility. The four main known methods of grain refining Mg-Al based alloys are superheating, the Elfinal process, native grain refinement and carbon inoculation, but these refining processes have not found widespread industrial use. Part of the reason for this is that the mechanisms of grain refinement in these methods is not fully understood. For instance, in the carbon inoculation method, the active Nucleant has been reported as Al4C3, Al2Mg2C2 and Al2CO, but this has not been confirmed. In this study, analytical electron microscopy approaches are being used to identify nucleants and investigate orientation relationships with the Mg-matrix. This new understanding is then being applied to develop an improved grain refiner for Mg-Al based alloys.
Liuqing Peng - Reactions between liquid AZ91 and mild steel crucibles
Investigator: Liuqing Peng
Supervisors: Dr. Christopher Gourlay
Title: Reactions between liquid AZ91 and mild steel crucibles
Duration: 01/12/2016 – 30/11/2020
In the Mg industry, liquid Mg-Al alloys are commonly melted, ladled and/or poured from steel containers because the ceramics used by the Al industry would react with liquid Mg and because there is a low solubility for Fe in liquid Mg. However, Fe reacts with the Al and Mn in AZ91 when the molten alloy is held above the liquidus temperature, e.g. for many hours before handling in high pressure die casting (HPDC). This can lead to the formation of Al-Mn-(Fe) intermetallic particles that build up as die-casting sludge, block filters in DC casting, and affect the corrosion performance of Mg components. In this study, electron backscatter diffraction (EBSD) and energy dispersive X-ray spectrometry (EDX) are utilized to understand the nucleation and growth mechanisms of Al-Mn-(Fe) intermetallics in liquid AZ91 in contact with mild steel, at a range of temperatures and holding times. The quantitative results are used to discuss (i) the build-up of die-casting sludge and methods to minimize this and (ii) the impurity pick-up from the steel crucibles.
Te-Cheng Su - In-situ synchrotron radiography and tomography studies of semi-solid deformation in Al alloys and steels
Investigator: Te-Cheng Su
Supervisor : Dr Chris Gourlay
Duration: 06/10/2014 - 31/03/2018 (Imperial College PhD Scholarship)
Collaborators: Tomoya Nagira, Osaka University; Hideyuki Yasuda, Kyoto University; Japan Synchrotron Radiation Research Institute (JASRI)
Description: The investigation of deformation of partially solidified alloys by in-situ X-ray synchrotron radiography has been widely reported in the last five years. It develops from the 2-D direct observation and a series of image analysis techniques on semi-solid alloys in isothermal holding. Further, some breakthroughs have been made such as tomographic reconstruction to observe the three-dimensional granular behaviour of partially solidified alloys during casting. There are several unexplored combinations of semi-solid microstructure, stress and accumulated strain which may affect the mechanical response of partially solidified alloys under loading. Therefore, the project is investigating the effect of grain size, shear strain rate and solid fraction on deformation mechanisms of Al-Cu alloys and steels in the semi-solid state by the application of in-situ X-ray synchrotron radiography and tomography. We are adapting ideas and methods from soil mechanics to track the microstructural evolution including the liquid flow field, strain field and grain motion during loading in order to develop new perspectives for filling, feeding and defect formation in alloy casting.
Jingwei Xian - The nucleation and growth of Cu6Sn5 in solders
Investigator: Jingwei Xian
Supervisor: Dr Chris Gourlay
Duration: 5/11/2012 - 4/11/2015 (PhD Studentship)
Description: Cu6Sn5 crystals are commonly found in Pb-free solder joints and their size, shape and volume fraction influence the reliability of joints (e.g. during thermomechnical fatigue). This project aims to control the Cu6Sn5 size and morphology by building a fundamental understanding of the nucleation and growth of Cu6Sn5 in both the bulk solder and the interfacial layer. The project uses analytical electron microscopy to investigate the 3D growth morphology, and stable isotope SIMS to study diffusion mechanisms in interfacial layers.